Parts

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Crank dust cap - Works with most three-piece crank models

- For MTB levers - 7mm x 1mm - Aluminum construction

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

Standard replacement star nuts for threadless steerers.

- Standard steel replacement

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Replacement master pin for The Shadow Conspiracy Interlock Race chains

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- All weather, longwear compound - Cantilever style - Length of pad: 50mm - Color: Black - Hardware Color: Silver - Post Orientation: Centered

• DIN standard design with anti-corrosion hardware • All weather compound • Offset post

Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

• Waterproof nylon seat cover • Protect your saddle from dirt and water

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!

- Plastic nylon molded body - Chromoly spindle - 318g pair

- An economical replacement chain for 1 speed and 6/7 speed non-index shifting systems. - 1/2 x 1/8 - 300 grams

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Improve your braking in dry and wet conditions with Origin-8's Pro-Force Post Pad Set. They fit most cantilever brakes and boast a grippy dual-compound material with channels to shed water for excellent performance and long life. They are also designed to reduce noise.

- Best seller - Shock Absorbing Design - Ridged Turbo Shape - Fits 7/8" Bars - Style: with Flange - Length: 110mm

- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use - High flange BMX style design with black press-in end plugs - Length: 145mm

- Comfortable and durable kraton rubber with a classic micro diamond knurled surface - 130mm length with closed end and BMX style flange